article: MT
Textured polyester 25 µm
0.00UAH m / n
Applicable topcoat thickness 25 µm
Low gloss wrinkled surface of textured polyester with fine sparkling reflections gives unique “non-metallic appearance”, satin and flashy look. Due to its very coarse texture gloss readings will be around 1-6. Textured polyester provides an optimum ratio between flexibility and hardness and at the same time has excellent weather resistance with minimal weathering and ageing rate. It is intended for use on roofings. It is possible to provide 15 µm primer.
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20 + 5, 20 + 15, 25 + 25
- Flexibility (max. T-bend): 2,5-3,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
Typical properties:
UV resistance
Corrosion resistance
Urban area
Industrial area
Rural area
Gloss
Hardness
Interior environment
Colors
Areas of application:
Wall
Roof
Other
Interior
RAL colors
Standard
Similar products
article: GL
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20+5, 15+5
- Flexibility (max. T-bend): 3.0-3.5
- Adhesion (cross-cut test): 0-1
- Impact test (J): ≥ 10
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.0
- Surface: no scratches
article: MT
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20 + 5, 20 + 15, 25 + 25
- Flexibility (max. T-bend): 2,5-3,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: MT2x
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20 + 5, 20 + 15, 25 + 25
- Flexibility (max. T-bend): 2,5-3,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: UMT
- High level of UV resistance: RUV 3-4
- Medium level of corrosion resistance: RC 3-4
- Coating thickness (topcoat + primer µm): 20 + 15, 25 + 15, 25 + 25
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: DECO
- High level of UV resistance: RUV 3
- Medium level of corrosion resistance: RC 3
- Coating thickness (topcoat + primer µm): 20 + 5, 20 + 15, 25 + 25
- Flexibility (max. T-bend): 2,5-3,0
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 10
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 1.5
- Surface: no scratches
article: PUR
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 20 + 15, 25 + 15
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2,5
- Surface: no scratches
article: Q
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 25 + 15
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2,5
- Surface: no scratches
article: HB
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 20 + 15, 25 + 10, 25 + 25
- Flexibility (max. T-bend): 1,5
- Adhesion (cross-cut test): 0
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2
- Surface: no scratches
article: PVDF
- High level of UV resistance: RUV 4
- Medium level of corrosion resistance: RC 4
- Coating thickness (topcoat + primer µm): 23 + 5, 20
- Flexibility (max. T-bend): 2,0
- Adhesion (cross-cut test): 0-1
- Impact test (J): ≥ 20
- Mek test (DR): >100
- Scratch resistance (kg): ≥ 2,5
- Surface: no scratches